• <li id="cqs4u"><li id="cqs4u"></li></li>
  • <small id="cqs4u"></small>
  • <small id="cqs4u"><li id="cqs4u"></li></small>
  • <small id="cqs4u"><li id="cqs4u"></li></small>
  • <small id="cqs4u"></small>
  • <td id="cqs4u"></td>
  • <td id="cqs4u"><button id="cqs4u"></button></td>
  • <td id="cqs4u"><li id="cqs4u"></li></td>
  • <td id="cqs4u"></td><small id="cqs4u"><li id="cqs4u"></li></small>
  • <td id="cqs4u"><button id="cqs4u"></button></td><small id="cqs4u"></small>
  • <small id="cqs4u"><li id="cqs4u"></li></small>
  • <td id="cqs4u"><button id="cqs4u"></button></td>
  • FC-W(SY)復卷分切機(帶印刷單元)

    FC-WII(SY)機型特點: 1、復卷控制:全自動氣動比例閥控制收卷芯軸夾持裝置提升,液壓伺服系統控制騎輥壓力,氣動頂針夾持芯軸。最大收卷直徑·1600mm。 2、分切刀下刀組:整體式刀軸,套滿多刃刀套。 3、前后復卷輥差速+騎輥控制成品密度及盤端整齊度; 4、后架:下壓式/底托式/側壓式,可正反轉,方便操作;獨立驅動導輥,導輥面自帶螺旋槽把紙幅展開,后架底部另有導輥將紙幅托起,避免紙幅接觸地面和減少伸長率損失。 5、領先的壓光技術,鋼對鋼壓光,壓光輥由高硬度合金鋼制成,由兩電機分別驅動,氣胎加壓,可調整壓光間隙,可調整交叉角度補償中高。 6、配翻斗運行保護,橫切小車斷紙。 7、自動落芯軸功能。 8、液壓或氣動比例閥控制騎輥升降,氣動比例提升收卷芯軸 9、后架可選配紙幅張力檢測系統,兩條鋁導輥加一條碳纖維檢測輥加張力傳感器,檢測紙幅的實時張力,反饋PLC處理信號控制退卷電機的快慢,以恒定每一紙幅的退卷張力。 10、可選配自動拔插軸系統,方便操作,提高效率 11、行星式雙色印刷單元,幅寬2840mm及3650mm,設計車速500m/min,額定車速450m/min 12、快速換版套筒兼容有縫樹脂版,無縫橡膠版,版套筒更換時間小于20分鐘。 13、高精度雙色套印,有縫樹脂版±0.5mm,無縫橡膠版±0.15mm 14、陶瓷網紋輥+密封式刮刀+自動攪拌過濾裝置組成的密封式水墨循環系統,避免臟污設備與水墨,減少水分蒸發,保持水墨流動性。 15、全自動版輥自動清洗系統,每次停機,兩色版面自動水洗吹干,保證印刷質量。 16、印刷退卷架配有浮動輥裝置或張力檢測輥裝置,印刷時恒定每個退卷架紙幅張力,保證紙幅伸長一致,避免紙幅層間和套印錯位。 Features of the FC-WII (SY) model: 1. Rewinding control: The fully automatic pneumatic proportional valve controls the lifting of the winding core shaft clamping device, the hydraulic servo system controls the roller pressure, and the pneumatic ejector pin clamps the core shaft. The maximum winding diameter is 1600mm. 2. Splitting knife lower blade group: integral blade shaft, covered with multi blade blade sleeves. 3. The differential speed of the front and rear rewinding rollers+the control of the density of the finished product and the neatness of the disc end by the riding roller; 4. Rear frame: downward pressure type, bottom support type, and side pressure type, with forward and reverse rotation for easy operation; Independently driving the guide roller, the guide roller surface is equipped with spiral grooves to unfold the paper web, and there is another guide roller at the bottom of the rear frame to lift the paper web, avoiding contact with the ground and reducing elongation loss. 5. Leading calendering technology, steel to steel calendering, calendering roller made of high hardness alloy steel, driven by two motors respectively, pneumatic tire pressurization, adjustable calendering gap, adjustable cross angle compensation for medium to high. 6. Equipped with flip bucket operation protection, the transverse cutting car breaks paper. 7. Automatic core drop function. 8. Hydraulic or pneumatic proportional valves control the lifting and lowering of the riding roller, while pneumatic proportional valves lift the winding core shaft 9. The rear frame can be equipped with a paper web tension detection system, which includes two aluminum guide rollers and one carbon fiber detection roller with a tension sensor to detect the real-time tension of the paper web, and feedback the PLC processing signal to control the speed of the unwinding motor to maintain a constant unwinding tension for each paper web. 10. Optional automatic shaft extraction and insertion system for easy operation and improved efficiency 11. Planetary dual color printing unit, width 2840mm and 3650mm, design speed 500m/min, rated speed 450m/min 12. The quick version change sleeve is compatible with the sewn resin version and seamless rubber version, and the replacement time of the version sleeve is less than 20 minutes. 13. High precision dual color overprint, seam resin version ± 0.5mm, seamless rubber version ± 0.15mm 14. The sealed ink wash circulation system composed of ceramic Anilox+sealed scraper+automatic mixing filter device can avoid dirt on equipment and ink wash, reduce water evaporation and maintain ink wash fluidity. 15. The fully automatic plate roller automatic cleaning system ensures the printing quality by automatically washing and drying the two color plates after each shutdown. 16. The printing unwinding rack is equipped with a floating roller device or a tension detection roller device. During printing, the tension of each unwinding rack's web is constant to ensure consistent web elongation and avoid misalignment between web layers and overprinting.

    FC-WII高速分切機

    FC-WII機型特點: 1·復卷控制:全自動氣動比例閥控制芯軸夾持裝置提升,氣壓伺服系統控制騎輥壓力,氣動頂針夾持芯軸; 2分切下刀刀組:整體式刀軸,套滿多刃刀套/可移動兩刃刀套;可選底刀快速更換功能; 3·前后復卷輥差速+騎輥控制成品密度及盤端整齊度; 4后架:有軸式/無軸式,下壓式/底托式/側壓式,可選正反轉功能,方便操作,獨立驅動導輥和托紙輥,無需托紙平臺,減少伸長率損失; 5·領先的壓光技術:高硬合金鋼鍍硬鉻拋光壓光棍,分單電機和雙電機驅動兩條壓光棍,采用氣胎加壓方式,契形墊塊微調間隙,可調整兩輥交叉角度補償中高; 6.配翻斗作運行保護; 7.自動落芯軸功能; 8.氣動比例閥(機型:2950);液壓伺服閥控制騎輥(機型:3750/4030); 9.可選自動插拔軸系統,方便操作,提高效率; 10.標配輔助散紙輥。 Features of FC-WII models: 1. Rewinding control: The fully automatic pneumatic proportional valve controls the lifting of the spindle clamping device, the pneumatic servo system controls the roller pressure, and the pneumatic ejector pin clamps the spindle; 2-part cutting blade set: integral blade shaft, fully covered with multi blade blade sleeve/movable two blade blade sleeve; Optional bottom knife quick replacement function; 3. Front and rear rewinding roller differential speed+ride roller control for finished product density and disc end uniformity; 4. Rear frame: axial/non axial, downward pressure/bottom support/side pressure, with optional forward and reverse functions for easy operation. It independently drives the guide roller and paper support roller, without the need for a paper support platform, reducing elongation loss; 5. Leading calendering technology: High hardness alloy steel plated with hard chromium polishing calendering rod, divided into single motor and dual motor drive two calendering rods, using pneumatic tire pressure method, wedge shaped cushion block fine adjustment gap, adjustable cross angle between two rollers to compensate for medium high; 6. Equipped with a flip bucket for operation protection; 7. Automatic core dropping function; 8. Pneumatic proportional valve (model: 2950); Hydraulic servo valve control roller (model: 3750/4030); 9. Optional automatic shaft insertion and extraction system for easy operation and improved efficiency; 10. Standard auxiliary loose paper roller.

    FC-V高速分切機

    FC-V機型特點: 1·復卷控制:全自動氣動比例閥控制芯軸夾持裝置提升,液壓伺服系統控制騎輥壓力,氣動頂針夾持芯軸; 2.分切下刀:每把底刀均由獨立的外轉子電機驅動; 3.前后復卷輥差速+騎輥控制成品密度及盤端整齊度;精確的對刀控制,誤差±0.1mm; 4·后架:可正反轉,方便操作;獨立驅動導輥,底部配導紙平臺,減少伸長率損失; 5·領先的壓光技術:鋼對鋼壓光,兩條壓光輥均由冷硬鑄鐵制成,且由兩個電機分別驅動;氣胎加壓;可調整的壓光間隙;可調整交叉角度補償中高; 6·配防護閘刀,進行運行保護,斷紙; 7.自動落芯軸功能; 8.液壓比例閥控制騎輥,氣動提升收卷芯軸; 9.可選自動插拔軸系統,方便操作,提高效率; 10.可選輔助散紙輥。 FC-V model features: 1. Rewinding control: The fully automatic pneumatic proportional valve controls the lifting of the spindle clamping device, the hydraulic servo system controls the roller pressure, and the pneumatic ejector pin clamps the spindle; 2. Cutting knife: Each bottom knife is driven by an independent outer rotor motor; 3. The differential speed of the front and rear rewinding rollers+the control of the density of the finished product and the neatness of the disc end by the riding roller; Accurate tool setting control with an error of ± 0.1mm; 4. Rear frame: capable of forward and reverse rotation, convenient for operation; Independently driven guide roller, equipped with a paper guide platform at the bottom to reduce elongation loss; 5. Leading calendering technology: steel to steel calendering, with two calendering rollers made of chilled cast iron and driven by two separate motors; Pneumatic tire compression; Adjustable pressure gap; Adjustable cross angle compensation medium high; 6. Equipped with protective knife for operation protection and paper breakage; 7. Automatic core dropping function; 8. The hydraulic proportional valve controls the riding roller and pneumatically lifts the winding core shaft; 9. Optional automatic shaft insertion and extraction system for easy operation and improved efficiency; 10. Optional auxiliary loose paper roller.

    FC-IV高速分切機

    FC-IV機型特點: 1.復卷控制:全自動氣動比例閥控制芯軸夾持裝置提升,液壓伺服系統控制騎輥壓力,氣動頂針夾持芯軸; 2.分切下刀刀組:整體刀軸,套滿多刃刀套; 3.前后復卷輥差速+騎輥控制成品密度及盤端整齊度; 4.后架:可正反轉,方便操作;獨立驅動導輥,底部配導紙平臺,減少伸長率損失; 5.領先的壓光技術:鋼對鋼壓光,兩條壓光輥均由冷硬鑄鐵制成,且由兩個電機分別驅動,氣胎加壓,可調整壓光間隙,可調整交叉角度補償中高; 6.配翻斗作運行保護,橫移小車斷紙; 7.自動落芯軸功能; 8.液壓比例閥控制騎輥,氣動提升收卷芯軸; 9.可選自動插拔軸系統,方便操作,提高效率; 10.可選輔助散紙輥。 Features of FC-IV models: 1. Rewinding control: The fully automatic pneumatic proportional valve controls the lifting of the spindle clamping device, the hydraulic servo system controls the roller pressure, and the pneumatic ejector pin clamps the spindle; 2. Cutting blade group: integral blade shaft, covered with multi blade blade sleeve; 3. The differential speed of the front and rear rewinding rollers+the control of the density of the finished product and the neatness of the disc end by the riding roller; 4. Rear frame: capable of forward and reverse rotation, convenient for operation; Independently driven guide roller, equipped with a paper guide platform at the bottom to reduce elongation loss; 5. Leading calendering technology: steel to steel calendering, with two calendering rollers made of cold hard cast iron and driven by two motors respectively. The pneumatic tire is pressurized, and the calendering gap can be adjusted, and the cross angle can be adjusted to compensate for medium high; 6. Equipped with a flip bucket for operation protection, and the transverse moving car breaks the paper; 7. Automatic core dropping function; 8. The hydraulic proportional valve controls the riding roller and pneumatically lifts the winding core shaft; 9. Optional automatic shaft insertion and extraction system for easy operation and improved efficiency; 10. Optional auxiliary loose paper roller.

    < 123 >
    国产末成年的女一区二区三区,精品国产91久久久久,久久久久亚洲AⅤ色欲av,亚洲AV一宅男色影视
  • <li id="cqs4u"><li id="cqs4u"></li></li>
  • <small id="cqs4u"></small>
  • <small id="cqs4u"><li id="cqs4u"></li></small>
  • <small id="cqs4u"><li id="cqs4u"></li></small>
  • <small id="cqs4u"></small>
  • <td id="cqs4u"></td>
  • <td id="cqs4u"><button id="cqs4u"></button></td>
  • <td id="cqs4u"><li id="cqs4u"></li></td>
  • <td id="cqs4u"></td><small id="cqs4u"><li id="cqs4u"></li></small>
  • <td id="cqs4u"><button id="cqs4u"></button></td><small id="cqs4u"></small>
  • <small id="cqs4u"><li id="cqs4u"></li></small>
  • <td id="cqs4u"><button id="cqs4u"></button></td>